Need help?Do you have a question about the SanDisk G-RAID MIRROR and is the answer not in the manual?
General| Operating Temperature | 5°C to 35°C (41°F to 95°F) |
|---|---|
| Warranty | 5-Year Limited Warranty |
| RAID Configuration | RAID 1 (Mirror) |
| Drive Type | 7200 RPM HDD |
| Compatibility | macOS, Windows |
| Capacity | 8TB, 12TB, 16TB |
| Non-Operating Temperature | -20°C to 60°C (-4°F to 140°F) |
Overview of the main capabilities and advantages of the G-RAID MIRROR device.
Lists the essential components included with the G-RAID MIRROR hardware.
Important safety guidelines and best practices for handling the SanDisk Professional device carefully.
Details the operating systems and versions supported by the G-RAID MIRROR.
Identifies and explains the components located on the front of the G-RAID MIRROR device.
Describes the ports and connections available on the back of the G-RAID MIRROR.
Explains the anchor points for custom mounting and accessories on the device's sides.
Step-by-step instructions for physically connecting the G-RAID MIRROR to a computer.
Explains the meaning of the different LED lights on the G-RAID MIRROR.
Details the status indications provided by the system LED on the device.
Describes the LED indicators for the individual drives within the G-RAID MIRROR.
Guidance on configuring the RAID settings for the G-RAID MIRROR device.
Instructions on how to change the RAID mode using the device's dip-switches.
Information on the supported RAID levels (0, 1, JBOD) for the G-RAID MIRROR.
Detailed steps for modifying the RAID configuration, including warnings about data loss.
Procedure for initializing or re-initializing the G-RAID MIRROR for macOS use.
Steps for reformatting the device for Windows compatibility, with data loss warnings.
Instructions on how to properly insert a PRO-BLADE SSD MAG into the device.
Explains the LED indicators specific to the PRO-BLADE SSD MAG slot.
Procedures for safely disconnecting the G-RAID MIRROR from a computer.
Step-by-step guide for replacing a failed drive in the G-RAID MIRROR.
Process for rebuilding the RAID 1 array after a drive replacement.
Details the 5-year limited warranty terms for regions outside Australia.
Specifies the warranty terms for Australian consumers, adhering to local laws.
Provides contact and address information for the warrantor, Western Digital.
Instructions on the process for initiating and making a warranty claim.
Overview of the device's compliance with various regulatory standards.
Information regarding FCC compliance for the G-RAID MIRROR device.
Details Canadian regulatory compliance standards (ICES-003/NMB-003).
Information on safety approvals for the US and Canadian markets (CAN/CSA).
Compliance declaration for European Union directives (EMC, Low Voltage, RoHS).
Austrian confirmation of compliance with EU directives and specific safety requirements.
Specific compliance information and usage notes for Japan.
Korean compliance statement for information and communication equipment.
Details hazardous substance content compliance according to Chinese regulations.
Taiwan's compliance standards for EMC and safety regulations.
To Next Page
