SanDisk G-RAID MIRROR User Manual

System LED Behavior State Description
O Power Saving Drive is powered on and connected to
host that goes to sleep, suspend or is
powered o.
Blinking White → O Overheating or Fan
Failure
Drive is powered on, connected to host
and overheating.
Drive LED Status
The Drive LED Status is located on the drive tray. To access these LED
lights, remove the front cover from the G-RAID MIRROR device (Reference
Topic: Drive Replacement). The LED lights are located on the right-hand
side of the drive trays. They include blue, red, and white colored lights to
indicate the status. Reference the table below to see the G-RAID MIRROR
Drive LED Status with the corresponding System LED status.
Table 2: Drive LED Status
System LED Drive 1 LED Drive 2 LED RAID Status
Red and White
Blinking → White
Blinking → Solid
White
Blue Blue Power On
Red Red Blue RAID 0 Drive 1 Failed
Red Blue Red RAID 0 Drive 2 Failed
Blinking Red Red Blinking Blue RAID 1 Drive 1 Failed
Blinking Red Blinking Blue Red RAID 1 Drive 2 Failed
Solid White Off Blinking Blue JBOD Drive 1
Disconnected
Solid White Blinking Blue Off JBOD Drive 2
Disconnected
Alternating between
Red and White
Alternating between
Red and Blue
Alternating between
Red and Blue
RAID Rebuild
RAID SETUP
The following information will provide instructions on changing the G-
RAID MIRROR's RAID configuration.
Warning!:
Changing the RAID configuration will result in data loss.
Main Activities
SanDisk Professional
User Manual
7

SanDisk G-RAID MIRROR Specifications

General

Brand	SanDisk
Model	G-RAID MIRROR
Category	Storage
Language	English