to the host computer system. Use the port on the left-hand side to daisy-chain
another Thunderbolt 3 device.
SIDE ANCHORS
Reference illustration 2.3 below.
1. Anchor Points for Custom Mounting & Accessories—These four (2 on each side)
anchor points are designed to be used for customization, such as attaching the
SanDisk Professional
G-DRIVE PROJECT to a DIT cart, a mounting plate, adding
a handle, or other gear for your production needs.
NOTE:
Included screws are not designed for attaching accessories or anchoring – anchor screws
not included. Anchor points will accept a ¼”-20 screw. The screw length will vary based on the type
of mount.
Technical Specifications
SanDisk Professional
User Manual
4
To Next Page
Loading...
