▪ Click the Use as Backup Disk button if you want to use the drive with
Time Machine.
▪ Click the Don't Use or Decide Later button if you do not want to use
Time Machine at this point.
8. This should complete the initialization process, and the G-DRIVE
PROJECT should now be erased.
REFORMATTING THE G-DRIVE PROJECT
G-DRIVE PROJECT is set up at the factory for use with macOS systems but
can be reformatted for use with Windows 10 and higher.
CAUTION:
Reformatting the device will erase all of its contents. If you have saved files on the
device, back them up to another file storage location before reformatting it.
NOTE: Safely disconnect and remove any PRO-BLADE SSD mag from the PRO-BLADE SSD mag
slot before beginning this process.
For instructions on formatting your device for Windows, please visit
SanDisk Professional Support, and review Answer ID 30566.
Main Activities
SanDisk Professional
User Manual
8
To Next Page
Loading...
