Settings
25
Power Saver
The Power Saver function turns the player off automatically when it has been idle for
a defined period of time.
1. Select Power Saver.
1. Press the |<< or >>| button to select desired time (off to 120 minutes) before
power off. The player will not enter the power saver mode if it is set to off.
2. Press Select and confirm your choice by selecting Yes or No.
Sleep
The Sleep function turns the player off automatically after a defined period of
playback time.
2. Select Sleep.
3. Press the |<< or >>| button to select desired playback time before power off.
The player will not enter the sleep mode if it is set to off.
4. Press Select and confirm your choice by selecting Yes or No.
Language
1. Select Language.
2. Select a desired language.
Date & Time
1. Select Date & Time.
2. Set the Month, Date, Year, Hour, Minute, and time format.
Brightness
To adjusting the display brightness for better viewing in different lighting environment,
follow these steps:
1. Select Brightness.
2. Press the |<< or >>| button to set the contrast level.
3. Press Select and confirm your choice by selecting Yes or No.
Volume
1. Select Volume.
2. Select Normal or High, and then press Select button.
Reset Factory Settings
1. Select Reset Factory Settings.
2. Confirm your choice by selecting Yes or No.
Info
This displays information regarding your Sansa
®
Clip+ MP3 player (such as firmware
version, available/free memory, number of contents loaded in the player, and the
battery status)
To Next Page
Loading...
