Charging Your Sansa Connect
Your Sansa Connect comes with a rechargeable battery. To charge the battery, either:
• Connect the large connector of the USB cable into the dock connector port on the bottom of your
Sansa Connect, connect the small connector or the USB cable into the AC-USB charger, and plug the
AC-USB charger into a power source.
• Connect the large connector of the USB cable into the dock connector port on the bottom of your
Sansa Connect, and plug the smaller connector into a USB port on your computer.
TIP Some low-power USB ports (such as those found on a keyboard) may not be able to provide
enough power to charge your Sansa Connect’s battery; use a high-powered USB port for best
charging performance.
Transferring music using Yahoo! Music Jukebox
Connect the large connector of the USB cable into the dock connector port on the bottom of your Sansa
Connect, and plug the smaller connector into a USB port on your computer.
On your computer, open Yahoo! Music Jukebox. To transfer songs, drag and drop them to the Sansa
Connect icon in the left column.
8
To Next Page
Loading...
