SanDisk Ultra Plus User Manual

3

same for both desktop and notebook computers.

Clone your data

 
process. (These may vary depending on the
software used.)
1. Run your preferred data cloning software.

Data Select.)
3. Select your source drive. (This is usually your


4. Next, select your destination drive. (This your
SSD connected to your computer by the
SATA-to-USB cable.)

SanDisk Ultra Plus Specifications

General

Read Speed	Up to 530 MB/s
Operating Temperature	0°C to 70°C
Shock Resistance	1500G
Vibration Resistance	5 gRMS, 10-2000 Hz
Form Factor	2.5-inch
Interface	SATA 6Gb/s
Capacity	128GB, 256GB
Warranty	3 years