16
GB
Adding of Rinse Aid
Rinse aid helps to ensure water does not cling and leave marks on crockery during the drying phase and
helps crockery dry faster after it has been washed. Only pour rinse aid that is for domestic dishwashers into
the reservoir. This model is designed to use liquid rinse aids only.
Please follow the steps below to pour the rinse aid into the storage reservoir, and the amount will dispense
automatically.
1. Turn the cap and open as indicated.
2. When the cap open marking is aligned, you may lift the cap up.
3. Pour the rinse aid in until the level indicator turns completely black in colour and close the cap.
4. Be careful not to overfill the reservoir. Wipe up any spills. The approximate volume of the rinse aid
reservoir is 110ml.
If the water hardness in your area is soft, you may not need rinse aid as it may cause white film to
develop on your dishes.
Rinse aid warning light will illuminate when the reservoir is running out of
rinse aid and requires refilling.
Alternatively, you can judge the amount of rinse aid by checking the rinse
aid indicator right next to the reservoir’s cap. When the indicator is black, it
means it is full. When it is clear, it means it is almost empty.
To Next Page
Loading...
Need help?
General
