Sangean DT-120 - Volume Control; Tuning the Radio

2. ALIGNMENT FOR FM SENSITIVITY
a. Required Instruments：
Signal Generator
SSVM
b. Alignment Procedure
Mode
Adjustment
Procedure
(1) Set the power switch to ON.
(2) Connect a SSVM to the HEAD PHONE JACK O/P.
(3) Connect the output of the FM signal generator to the test point (TP5).
(4) Set FM to 106MHz.
FM L3
(5) Adjust L3 for maximum audio output.
c. Instrument Connection
L3
Signal Generator
TP5
6pF
To Speake
r
HEAD PHONE JACK O/P
SSVM
6