13
RESET BUTTON
If the radio fails to operate correctly or some digits on the display
are missing or incomplete, you may use a suitable implement
(the end of a paper clip or pen), press the RESET button located
at the bottom of the unit. This will reset the microprocessor, clock
time and clear all the stations stored in the preset memory.
SPECIFICATIONS
FREQUENCY COVERAGE:
FM band 87.50 - 108 MHz
MW band 522 - 1710 kHz
LW band 144 - 279 kHz
POWER SOURCE:
AC 230V/ 50Hz
Battery: UM-1 (D size) X 4
POWER CONSUMPTION:
AC Power: 8W
Battery power: 450 mA DC
10% T.H.D. OUTPUT POWER:
AC: 1.8 W typical
Battery: 0.9 W typical
Speaker: 5 inches, 4 ohm, 6W
Earphones impedance: 32 ohm.
To Next Page
Loading...
