Need help?Do you have a question about the Saniflo SANIFOS 110 P and is the answer not in the manual?
General| Brand | Saniflo |
|---|---|
| Model | SANIFOS 110 P |
| Category | Water Pump |
| Language | English |
Specifies the correct and incorrect uses of the pumping station.
Details warranty loss and damage liability for not following manual.
Guidelines for modifications, parts, and qualified personnel.
Table detailing pump and tank specifications for various models.
Continuation of technical specifications for SANIFOS® 610 and 1300 models.
Describes the tank's inlets, ventilation, and pump assembly.
Details authorized and unauthorized fluids for pumping.
Explains preparing terminal blocks for pump and float connections.
Overview of electrical wiring and terminal block usage.
Importance and method of ensuring proper tank ventilation.
Detailed instructions for wiring pumps and float switches.
Guidelines for installing the station in a floor-standing configuration.
Instructions for installing the pumping station in an underground configuration.
Overview of the control unit interface, indicators, and navigation.
Navigating menus, selecting languages, and viewing alarm history.
Checks required before commissioning the pumping station.
Explains automatic pump start/stop based on float levels.
Steps for safely shutting down and draining the pumping station.
Specifies permitted fluids and operational limits to avoid damage.
Safety warning regarding closing the control box cover before power-on.
Steps for functional, sealing tests, and initial pump operation.
Safety warnings regarding hazardous fluids and unqualified personnel.
Importance of maintenance, frequency, and contract recommendations.
Safety precautions and steps for performing maintenance.
To Next Page
