Need help?Do you have a question about the Saniflo SANIFOS 610 and is the answer not in the manual?
Details electrical installation requirements and safety measures.
Explains the meaning of various danger and warning symbols used.
Specifies correct usage and limitations of the pumping station.
General safety guidelines for handling and servicing the equipment.
Detailed technical data for various SANIFOS models.
Guidance on connecting pumps and floats using waterproof terminal blocks.
Specific instructions for wiring pumps and float switches.
Guidelines for installing the station in a floor-standing configuration.
Procedures and considerations for burying the pumping station.
Instructions for connecting the motor and float cables to the SMART box.
Overview of the control unit interface, alarms, and pump activation.
Checks required before starting the pumping station.
Steps for performing functional and sealing tests during commissioning.
Safety precautions for performing maintenance on the station.
Specific tasks for routine maintenance and inspection.
Comprehensive checklists for commissioning and maintenance tasks.
General| Type | Lifting station |
|---|---|
| Max Head | 14 m |
| Voltage | 220-240 V |
| IP Rating | IP68 |
| Frequency | 50 Hz |
| Inlet Diameter | 40mm |
To Next Page
