Need help?Do you have a question about the Saniflo SANIFOS 280 and is the answer not in the manual?
Explains the meaning of danger, warning, and caution symbols used in the manual.
Details the specific applications and fluid types authorized for the pumping station.
Specifies that installation and maintenance must be performed by qualified professionals.
Covers warranty voidance, use of original parts, and requirement for trained staff.
Provides detailed technical data on pump performance, power, and thermal characteristics.
Lists tank volumes, materials, discharge/input diameters, and ventilation details.
Graphical representation of pump performance based on flow rate and head.
Describes the sump tank function and lists authorized and unauthorized fluids for pumping.
Explains the process of wiring pumps and floats using terminal blocks TH400 and TH391.
Details the importance of ventilation, connection methods, and ensuring air flow.
Guidelines for installing the pumping station in a floor-standing configuration, including room requirements.
Initial considerations for underground installation, including soil analysis and regulations.
Details the preparation of conductive wires and connector wiring for the smart control box.
Explains the overview of the control unit interface, alarms, and pump activation/deactivation.
Guides on navigating the menu, selecting languages, viewing logs, and managing alarms.
Lists essential checks required before the pumping station can be commissioned.
Explains the automatic pump start/stop mechanism based on water level and float positions.
Emphasizes safety precautions, including decontamination and the need for qualified personnel.
Covers crucial safety warnings and preparatory steps before performing maintenance.
A comprehensive list of checks to perform during the initial setup and commissioning of the station.
Continues the detailed checklist for commissioning, including pump operation tests and system checks.
Specific checks to be performed on the SMART control unit after initial power-up.
General| Model | SANIFOS 280 |
|---|---|
| Voltage | 220-240 V |
| Protection Rating | IP68 |
| Max Head | 14 m |
| Vertical Pumping Distance | 14 m |
| Power Supply | 220-240V, 50Hz |
To Next Page
