10
E
NGLISH
www.sanitairecommercial.com
Automatic carpet height adjustment
• Your vacuum is designed with an automatic
self-adjusting nozzle. No manual adjustments
are required.
• The height of the nozzle automatically adjusts
to the flooring surface. This self-adjusting
feature allows the nozzle to float evenly over
all flooring surfaces (Fig.1).
Edge cleaning
• The edge cleaning feature provides improved
cleaning near walls and stationary furniture.
• For maximum edge cleaning, place the left
side of the nozzle, from the user’s
perspective, against the wall or stationary
furniture (Fig. 2).
Vacuuming under furniture
• Press the handle release pedal once for
routine vacuuming cleaning (Fig. 3).
• Continue to lower the handle to enable the
vacuum to lay flat on the floor for effective
cleaning under beds and furniture (Fig. 4).
Bare floor cleaning
• Your vacuum is equipped with a squeegee
to improve its effectiveness in cleaning
bare floors (Fig. 5).
How to operate cont.
1
3
4
5
2
To Next Page
Loading...
Need help?
General
