SM2000 Dry Ice Cleaning Machine User Manual and Maintenance Guide
Cautions
● Before use, verifying the machine's power supply is necessary. The power line's
current carrying capacity should be more significant than 10A. The power supply must
be adequately grounded and equipped with a leakage protection device and a fuse. The
power connection should be performed by a professional.
● Users cannot modify the "non-reconnectable plug" on the original product.
● The machine should be kept away from flammable and explosive materials.
● During routine maintenance, the power supply must be disconnected. In case of any
malfunction, users should seek assistance from professional repair personnel at
authorized service centers. Do not attempt to repair the machine on your own to avoid
potential dangers.
● Please ensure that the voltage and frequency indicated on the power supply and the
machine nameplate are consistent. Follow local electrical regulations to complete the
wiring and install grounding wires or residual current devices to prevent electric shock
hazards.
● To ensure smooth operation, ensure the machine is securely fixed during use.
● Note: The dry ice pellets added to the dry ice hopper should be used up completely
and not left inside the hopper to prevent melting and water accumulation. The interior
of the hopper should always be kept dry. Only dry ice particles that meet the
requirements should be placed in the hopper, and no other substances should be
introduced.
● Pipeline connections must be adequately sealed.
To Next Page