SM2000 Dry Ice Cleaning Machine User Manual and Maintenance Guide
Unpacking and Preparation
Unpacking
Remove the fastening screws and remove the machine from the wooden box. Check the
accessories against the packing list to ensure everything is complete.
Preparation
Due to the high noise level of 75dB or above generated during machine operation, wearing
protective earmuffs, goggles, and gloves in advance is necessary.
Connecting the Air Hose
Connect one end of the hose to the machine and the other end to the air compressor.
Connecting the Dry Ice Hose
Connect one end of the hose to the machine.
Assemble the Dry Ice Blasting Gun
First, assemble the gun handle.
Then, choose the appropriate nozzle and install it on the gun handle according to your
cleaning needs.
Finally, attach the ice shield to the handle.
Connect the Dry Ice Gun Handle to the Dry Ice Hose
Open the waterproof cover of the leakage protection switch on the side of the machine. Check
if the leakage switch is in the closed state. Then, ensure that all switches on the control panel
To Next Page