SM2000 Dry Ice Cleaning Machine User Manual and Maintenance Guide
Cleaning Operation
Power On Operation
1. Hold the dry ice gun handle with one hand and close the leakage switch on the side of
the machine.
2. Turn on the "Air" button and wait for stable compressed air to be released.
3. Turn on the "Ice" button and then the "Ice Output Adjustment" button. After a
moment, a high-pressure airflow mixed with dry ice particles will be emitted.
4. The “Ice Output Adjustment” button can adjust dry ice output. Turn it clockwise to
increase the output and counterclockwise to decrease it.
5. The machine also has a remote control that allows remote start/stop control: Press the
"A" button to activate high-pressure air output and press it again to stop the
high-pressure air. Press the "B" button to start the dry ice output and press it again to
stop the dry ice output.
6. Press the handheld dry ice gun trigger to start the operation. For continuous operation,
press the black button on the handle.
Power Off Operation
When the cleaning operation is complete, you need to shut down the machine:
1. Turn off the "Ice" button to allow the high-pressure air to blow away any remaining
dry ice particles in the pipes.
2. Turn off the "Air" button to stop the output of high-pressure air.
3. Disconnect the power supply and unplug the power plug.
4. Remove the dry ice hose and air hose, and insert the dry ice gun into the gun holder on
the side of the machine.
To Next Page