Need help?Do you have a question about the Sansui AU-505 and is the answer not in the manual?
Instructions for playing records using the amplifier.
Guide for tuning and listening to radio broadcasts.
Steps for connecting and using a microphone with the amplifier.
Steps to record audio from the amplifier onto a tape deck.
Instructions for playing back recorded audio from a tape deck.
Details on the switched and unswitched AC outlets on the rear panel.
Guide on how to adjust the amplifier for different voltage regions.
Steps to diagnose and replace a blown main power fuse.
Information on quick-acting fuses protecting power transistors.
Guide for dismantling the amplifier's exterior components.
Parts list for the F-1303A Equalizer/Tone Control circuit board.
Parts list for the F-2001 Filter circuit board.
Parts list for the F-1266A Power Amplifier circuit board.
Advice on contacting Sansui dealers or service stations for assistance.
List of included accessories with the amplifier.
General| Total Harmonic Distortion | 0.8% |
|---|---|
| Damping Factor | 30 |
| Input Sensitivity | 2.5mV (MM) |
| Signal to Noise Ratio | 70dB (MM) |
| Speaker Load Impedance | 4 to 16 Ohms |
| Output | Pre out |
| Power Output | 20W per channel into 8Ω (stereo) |
| Channel Separation | 50dB (1kHz) |
To Next Page
