Need help?Do you have a question about the Sansui AU-919 and is the answer not in the manual?
General| Power Output | 100 watts per channel into 8Ω (stereo) |
|---|---|
| Damping Factor | 100 |
| Speaker Load Impedance | 8Ω to 16Ω |
| Type | Integrated Amplifier |
| Total Harmonic Distortion | 0.008% |
| Input Sensitivity | 2.5mV (MM) |
| Signal to Noise Ratio | 110 dB (line) |
Details RMS power output and THD.
Specifies THD levels for power amp input.
Details IM distortion using SMPTE method.
Details RIAA curve deviation for phono input.
Lists input sensitivity and impedance for various inputs.
Details hum and noise levels for different inputs.
Detailed description of MC Head Amp and Phono EQ circuit.
Details the DD/DC circuit's operation and features.
Procedures for adjusting the MC Head Amp circuit.
Procedures for adjusting the Equalizer Amp circuit.
Procedures for adjusting the Flat Amp circuit.
Procedures for adjusting the Driver Circuit.
Notes for replacing the pre-amp power supply board.
Notes for replacing the power amp power supply board.
General repair notes and precautions for transistors and boards.
To Next Page
