Need help?Do you have a question about the Sansui AU-101 and is the answer not in the manual?
General| Power Output | 15 watts per channel into 8Ω (stereo) |
|---|---|
| Total Harmonic Distortion | 0.8% |
| Damping Factor | 30 |
| Speaker Load Impedance | 8Ω to 16Ω |
| Signal to Noise Ratio | 80dB (line) |
| Output | Headphones |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Channel Separation | 50dB |
Identifies the product covered by the manual.
Instructions for using the record player input.
Guide for listening to radio programs.
Guidelines for connecting and using microphones.
Steps for recording, playback, and monitoring tapes.
Proper connection of shielded wires to prevent humming and buzzing.
Procedure for changing the unit's voltage setting for different regions.
How to check and replace power and quick-acting fuses.
Details on the rear panel AC outlets and their ratings.
Steps to remove the front panel, bonnet, and bottom plate.
Comprehensive list of performance parameters and electrical characteristics.
Power requirements, dimensions, and weight of the amplifier.
Component identification and placement for the main amplifier circuit.
Component identification and placement for the equalizer/tone control circuit.
List of included accessories such as manuals and pin-plugs.
To Next Page
