Need help?Do you have a question about the Sansui AU-70 and is the answer not in the manual?
General| Channel Separation | 50dB |
|---|---|
| Speaker Load Impedance | 4Ω to 16Ω |
| Weight | 16.5kg |
| Frequency Response | 20Hz to 20kHz |
| Input Sensitivity | 2.5mV (MM), 200mV (line) |
| Signal to Noise Ratio | 75dB (MM) |
| Valve Complement | 12AX7 |
| Type | Valve Amplifier |
| Input Impedance | 47kΩ (MM), 100kΩ (line) |
Connect speakers for stereophonic, monaural, or 3D reproduction.
Volume, balance, blend, loudness, presence, tone defeat, low/high filters, and bass/treble controls.
Steps for playing records, including stereo, monaural, and cartridge setup.
Instructions for recording and playing tapes, including tape monitoring.
To Next Page
