Need help?Do you have a question about the Sansui AU-4900 and is the answer not in the manual?
General| Total Harmonic Distortion | 0.1% |
|---|---|
| Damping Factor | 30 |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Signal to Noise Ratio | 75dB (MM), 90dB (line) |
| Channel Separation | 50dB (MM), 55dB (line) |
| Output | 150mV (line) |
| Speaker Load Impedance | 8Ω (minimum) |
Avoid exposing the appliance to rain or moisture to prevent fire or shock hazard.
How to use the POWER/SPEAKERS switch to turn the unit on and select speaker systems.
Using Bass, Treble, and Loudness controls for sound shaping.
Using Low and High Filter switches to reduce unwanted noise.
Steps for playing records, including volume and selector adjustments.
Troubleshooting hum, howling, or shallow reproduction during record playback.
Details on RMS power output and impedance for speaker systems.
Information on power bandwidth, total harmonic, and intermodulation distortion.
To Next Page
