Sansui SR-929 - Page 6

PRECAUTIONS
Turntable dismantling
Do not extract the unit's platter shaft or dismantle the motor assembly;
NEVER try to touch any part inside the turntable unit. Such action
may result in deterioration in performance or in mechanical break-
down.
Caution prior to operation
* Avoid exposing the turntable (as well as your amplifier and other
audio equipment) to rain or direct sunlight.
* Avoid exposing the turntable to dust, excessively warm or cold
temperatures.
* Place your turntable on a solid, vibration-free surface. .
* Avoid placing your turntable on an inclined surface, otherwise
incorrect stylus tracking will deteriorate overall performance. See
that the surface of a record, when placed upon the platter, is strictly
horizontal.
* The surface of the cabinet is specially coated. When cleaning is
required, apply only this silicon oil specially supplied or silicon oil
for polishing piano.
* Avoid subjecting the stylus and tonearm to unreasonable stress. The
tonearm of your turntable should be handled with special care, for
it is more loosely mounted than conventional tonearms, adopting a
knife-edge support system for faithful groove tracing of its stylus.