Sanus Systems BF16 - User Manual

Need help?

Do you have a question about the Sanus Systems BF16 and is the answer not in the manual?

Summary

Assembly Instructions for Basic Foundations

Parts and Hardware Identification

Identify all included components and hardware before assembly.

Assemble Pillars to Base

Attach the pillars to the base using screws, ensuring correct orientation.

Add Top Plate to Pillars

Secure the top plate to the pillars using screws, aligning countersunk holes.

Add Isolation Pads and Carpet Spikes

Apply isolation pads to the top plate and insert carpet spikes into the base.

Add Wire Covers

Install wire covers into the grooves of the pillars for wire management.

This document provides assembly instructions for the Sanus Systems Basic Foundations, specifically models BF16, BF24, and BF31. These products are designed to serve as speaker stands, offering a stable and aesthetically pleasing platform for audio speakers. The "UNION OF FORM AND FUNCTION" tagline highlights the product's dual focus on design and practical utility.

Function Description

The Sanus Systems Basic Foundations are speaker stands designed to elevate speakers to an optimal listening height, improve sound quality by reducing resonance, and provide a stable platform. The stands consist of a base, pillars, and a top plate, with options for wire management and isolation.

Important Technical Specifications

The manual does not provide explicit technical specifications such as weight capacity, dimensions, or materials beyond the names of the components. However, it implies the following:

Component-based Assembly: The stands are assembled from individual components: Isolation Pads (a), Screws (b), Carpet Spikes (c), Base (d), Top Plate (e), Pillar (f), and Wire Covers (g).
Model-Specific Wire Covers:
- BF16 & BF24 models require two Wire Covers (g).
- BF31 model requires four Wire Covers (g) to span the full height, suggesting it might be a taller stand or have a different pillar configuration.
Fastening Method: Components are primarily fastened using screws (b) and a Phillips screwdriver.
Isolation: Isolation Pads (a) are self-adhesive and placed on the top plate to provide speaker isolation, reducing vibrations and improving sound clarity.
Stability: Carpet Spikes (c) are provided for enhanced stability on carpeted surfaces and to reduce resonance.

Usage Features

Assembly Process:
- Step 1: Parts and Hardware Check: Users are instructed to verify all parts and hardware are present and free of defects before assembly.
- Step 2: Assemble Pillars to Base: Pillars (f) are attached to the Base (d) using screws (b). The rounded or beveled edge of the pillars should face the front of the stand. Users are explicitly warned NOT to use power drivers for tightening screws to prevent damage.
- Step 3: Add Top Plate to Pillars: The Top Plate (e) is attached to the Pillars (f) using screws (b). The two closer countersunk holes on the top plate should face the front of the stand. Again, users are warned NOT to use power drivers.
- Step 4: Add Isolation Pads and Carpet Spikes:
  - Isolation Pads (a): These self-adhesive pads are placed in the extreme corners of each Top Plate (e) for stability and resonance reduction.
  - Carpet Spikes (c): These are inserted into small holes on the bottom side of the Base (d). A wooden or rubber mallet may be needed to tap them in. The manual notes that carpet spikes are optional and warns about potential damage to wood floors or furniture, as well as the hazard of small objects to children. Sanus Systems disclaims liability for damage or injury resulting from their use.
- Step 5: Add Wire Covers: After placing the speaker on the stand and routing the speaker wire between the pillars and through the hole in the base, the plastic Wire Covers (g) are snapped into the grooves in the pillars for cable management. The BF31 model requires two wire covers per stand to cover the full height.
Required Tool: A Phillips screwdriver is the only tool explicitly required for assembly.
Resonance Reduction: The inclusion of Isolation Pads and Carpet Spikes indicates a design focus on minimizing unwanted vibrations and improving audio performance.
Cable Management: Wire Covers (g) are integrated to conceal speaker wires, contributing to a cleaner aesthetic.

Maintenance Features

The manual does not explicitly detail maintenance features. However, the following can be inferred:

Pre-Assembly Inspection: Users are advised to check for missing or defective parts before assembly, which is a crucial step for preventing issues and ensuring product longevity.
Customer Service Support: Sanus Systems provides customer service (800.359.5520) for assistance with missing or damaged parts, and replacement parts can be shipped directly to the customer. This suggests a commitment to supporting the product throughout its lifespan.
Careful Assembly: The repeated warning against using power drivers for tightening screws implies that proper, gentle assembly is key to preventing damage and ensuring the stand's structural integrity over time.

Overall, the Sanus Systems Basic Foundations are presented as user-friendly, assembly-required speaker stands designed with both acoustic performance and aesthetic integration in mind, offering features like vibration isolation and cable management.