20
Manage Cables
1. Pull down and hold both release cords
R
while gently pulling the bottom of the TV away from the wall until the kick stands fall into place.
CAUTION: To prevent breaking the locking latch: always pull and hold release cords
R
down while pulling the TV away from the wall.
2. Temporarily rest the TV on the kick stands
K
while assembling the cables on the TV.
CAUTION: TV is not secured to the wall when it is in the kick stand position. Assistance is recommended for this step.
3. Lift the kick stands
K
up while holding the TV.
4. Gently rest the TV back until the brackets click and lock the TV in place.
R
K
K
KR
01
01
01
01
15
1 2 3 4
To Next Page
Loading...
