Sanus MLF13 - Step 2: Attach Wall Plate to Wall

10
STEP 2 Attach Wall Plate to Wall
Wood Stud
CAUTION: Avoid potential personal injuries and property damage!
● Drywall covering the wall must not exceed 5/8 in. (16 mm)
● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
● Minimum horizontal space between fasteners: 16 in. (406 mm)
1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2. Level the wall plate
17
and mark your hole locations.
1
2
Max. 5/8 in.
(16 mm)
17
16 in.
(406 mm)