The SANUS OLF24-B2 is a full-motion TV wall mount designed for indoor use, offering versatile positioning and secure installation for a wide range of televisions.
Function Description:
This product serves as a robust mounting solution that allows a television to be attached to a wall, providing full-motion articulation. This means the TV can be extended, retracted, tilted, swiveled, and leveled to achieve optimal viewing angles from various positions in a room. The full-motion capability is particularly useful for reducing glare, improving line of sight, and adapting to different seating arrangements. The mount is designed to accommodate TVs with specific hole patterns and weights, ensuring compatibility and safety.
Important Technical Specifications:
- TV Weight Limit: The mount is designed to support TVs (including accessories) weighing up to 150 lbs (68 kg). Exceeding this limit will render the mount incompatible and unsafe.
- Wall Construction Compatibility:
- Acceptable: Wood studs (common 2x4 in. / 51x102 mm nominal 1½ x 3½ in. / 38x89 mm minimum size, with a minimum horizontal space between fasteners of 16 in. / 406 mm), solid concrete, or concrete block (minimum 8 in. / 203 mm thickness for solid concrete; minimum 8x8x16 in. / 203x203x406 mm size for concrete block).
- NOT Acceptable: Drywall alone. Drywall alone will not hold the weight of the TV and mount.
- Wall Support Requirement: The wall must be capable of supporting five times the combined weight of the TV and the mount.
- TV Hole Pattern (VESA): The mount supports various VESA patterns, including:
- 75 x 75 mm
- 100 x 100 mm
- 200 x 200 mm
- 300 x 300 mm
- 400 x 400 mm
- 600 x 400 mm
- 400 x 200 mm
- 200 x 400 mm
- Dimensions (Fully Assembled Mount):
- Height: 21.6 in (550 mm)
- Width: 28.5 in (724 mm)
- Extension/Retraction:
- Extended: 24.0 in (611 mm) from the wall (top view)
- Retracted: 3.5 in (88 mm) from the wall (side view)
- Tilt Adjustment:
- Up: 4 degrees
- Down: 15 degrees
- Swivel Adjustment: 35 degrees left and right (total 70 degrees)
- Roll Adjustment: 5 degrees
- Hardware Included:
- TV Screws (M6, M8 in various lengths: 12mm, 20mm, 30mm, 35mm, 40mm, 50mm)
- Washers (M6/M8)
- Spacers (2.5mm, 5mm, 22mm)
- TV Bracket and Extenders
- Interface Screws (M8 x 12mm)
- Wall Plate Template
- Lag Bolts (5/16 x 3½ in.) and Lag Bolt Washers (5/16 in.) for wood stud installations
- Concrete Anchors (Fischer UX10 x 60R) for concrete installations
- Arm Assembly
- Locking Screw (1/4-20 x 5/8 in.)
- Wall Plate Screws (1/4-20 x 3/8 in.) and Washers (1/4 in.)
- Cable Covers
- Hex Key (3/16 in.)
- Cover Plates
- Tools Needed (for installation):
- Tape Measure
- Pencil
- Level
- Tape
- Screwdriver
- Electric Drill
- Socket Wrench (1/2 in. / 13 mm)
- Stud Finder (for wood stud install)
- Awl (for wood stud install)
- Wood Drill Bit (7/32 in. / 5.5 mm) (for wood stud install)
- Concrete Drill Bit (3/8 in. / 10 mm) (for concrete install)
- Hammer (for concrete install)
Usage Features:
- Easy Installation Process: The manual emphasizes a straightforward installation process, though it strongly advises reading all instructions thoroughly.
- TV Bracket Configuration: The TV bracket can be configured in multiple ways (A, B, C, D, E, or F) to match various TV hole patterns, ensuring broad compatibility.
- Spacer Options: Includes different spacer lengths (2.5mm, 5mm, 22mm) and screw sizes (M6, M8) to accommodate flat-back TVs, TVs with deep inset holes, cable interference, or rounded/irregular back TVs. This ensures proper thread engagement and a secure fit.
- Full-Motion Adjustability:
- Tilt Adjustment: Allows the TV to be tilted up or down to reduce glare and optimize viewing. A side tension knob (T) can be adjusted by hand or with a hex key (18) to control the stiffness of the tilt mechanism.
- Level Adjustment: Features leveling screws (L) that can be loosened with the hex key (18) to adjust the TV's horizontal level, then retightened to secure the position.
- Lateral Shift: For wood stud applications, the arm assembly (12) can be repositioned laterally on the wall plate (08) to center the TV. This involves removing cover plates, screws, and washers, shifting the arm, and then reattaching everything. For concrete applications, the arm's base must remain centered on the wall plate.
- Cable Management: Integrated cable covers (16, 17) help to conceal and organize cables, providing a clean and tidy appearance. Users are advised to fully extend the arm (12) to ensure sufficient cable slack during operation.
- Locking Mechanism: A locking screw (15) is used to securely fasten the TV to the arm assembly, preventing accidental dislodgement.
- Safety Warnings: Prominent CAUTION and WARNING labels throughout the manual highlight critical safety instructions, such as avoiding power screwdrivers for certain steps, ensuring proper thread engagement, and verifying wall strength.
Maintenance Features:
- Hex Key Storage: The hex key (18) can be conveniently stored behind the upper cover plate (19) for future adjustments, making it easily accessible for tilt and level adjustments.
- Adjustability for Longevity: The ability to adjust tilt and level over time means the mount can be fine-tuned as needed, ensuring continued optimal viewing and stability.
- Removable Components: The TV and arm assembly can be removed from the wall plate, facilitating maintenance, relocation, or access to the wall behind the TV. This process is highlighted as "HEAVY!" and may require assistance.
The SANUS OLF24-B2 is a comprehensive and user-friendly TV wall mount, prioritizing both functionality and safety for a superior home entertainment experience.
Need help?
General
To Next Page
