Need help?Do you have a question about the Sanwa PC510a and is the answer not in the manual?
General| Brand | Sanwa |
|---|---|
| Model | PC510a |
| Category | Multimeter |
| Language | English |
Details the meaning of symbols used for safety instructions and cautions in the manual.
Provides critical safety instructions to prevent accidents like burns and electrical shock.
Lists input terminals, maximum rating input values, and maximum overload protection for various functions.
Describes the multimeter's use in circuitry analysis and measurement of various equipment.
Highlights key features of the PC500a/PC510a and PC510a models, like safety standards and measurement capabilities.
Identifies and illustrates the various controls, terminals, and test leads of the multimeter.
Explains the meaning of symbols and indicators shown on the multimeter's LCD display.
Explains how to turn on/off the power and select measurement functions using the rotary switch.
Details the automatic power-off feature designed to extend battery life after a period of inactivity.
Describes the indication shown on the display when the battery voltage drops to a low level.
Explains how to cycle through different measurement modes using the SELECT button.
Describes how to set manual range mode and step through ranges, and how to return to auto mode.
Explains how to freeze the current display reading and how to cancel the data hold function.
Details the process for calibrating test leads to compensate for resistance, especially for low resistance measurements.
Instructions on how to disable the audible beeper feature by pressing the Hz button.
Information about the optical isolated interface port for data communication and required accessories.
Explains the warning signal and display ("InErr") for incorrect terminal insertion.
How to activate and use the mode to record maximum and minimum readings, and exit the mode.
How to capture short voltage or current signals (peak hold) and cycle through MAX, MIN, and MAX-MIN readings.
How to offset measurements using the displayed reading as a reference value.
Explains the feature that magnifies the analog bar graph resolution for viewing minute signal changes.
Describes Analog Bargraph and AC Sensing (Average RMS vs True RMS).
Safety checks and continuity test for test leads before starting measurement.
Procedures for measuring DC and AC voltage, including applications, ranges, and connections.
Instructions for measuring the frequency of AC circuits, including ranges and connection methods.
How to measure temperature using a K-type thermocouple and the procedure for selecting Celsius or Fahrenheit.
Outlines procedures for capacitance, diode testing, resistance, and continuity measurements.
Explains how to measure DC and AC current, including safety precautions and applications.
Details the usage of optional accessories like clamp probes and temperature probes with the multimeter.
Guidelines for inspecting the multimeter and test leads for damage and ensuring proper function.
Information on recalibration requirements and what to do if a calibration error message appears.
Safety precautions and procedures for replacing the battery and fuses in the multimeter.
Recommendations for storing the multimeter to prevent damage from environmental factors like heat, humidity, and vibration.
Details the one-year warranty policy, its limitations, and conditions for coverage.
Information required from customers when requesting repair services for the multimeter.
Provides the official website and email address for Sanwa Electric Instrument Co., Ltd. for support.
Lists general specifications like display, sampling rate, operating conditions, power supply, and safety standards.
Details accuracy specifications for DC Voltage, AC Voltage, and DC Current measurements across different ranges.
To Next Page
