Need help?Do you have a question about the Sanwa cd732 and is the answer not in the manual?
General| Diode Test | Yes |
|---|---|
| Continuity Check | Yes |
| DC Current Ranges | 400µA, 4000µA, 40mA, 400mA, 10A |
| AC Current Ranges | 400µA, 4000µA, 40mA, 400mA, 10A |
| Resistance Ranges | 400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ |
| Capacitance Ranges | 400nF, 4µF, 40µF, 100µF |
Defines safety symbols used in the manual and on the instrument for user protection.
Lists critical safety guidelines and warnings to prevent electrical shock and injury during operation.
Describes the multimeter's intended uses in measuring weak, low-capacity electrical circuitry.
Highlights the multimeter's compliance with safety standards, display capabilities, and special functions.
Explains the meaning and function of various indicators on the multimeter's digital display.
Identifies and labels the main parts of the multimeter and its test leads for user reference.
Details the operation of the power switch, range hold, data hold, and select buttons.
Explains the auto power-off feature and the 'O.L' indication for input overload conditions.
Provides instructions on how to deploy and use the multimeter's built-in stand for stable positioning.
Outlines the essential checks and connections required before performing any measurements.
Step-by-step guide for safely and accurately measuring DC voltage using the multimeter.
Instructions for performing AC voltage measurements, including range selection and connection.
Procedure for measuring the frequency of AC signals, specifying input conditions and ranges.
Guide to measuring the duty cycle of pulse signals, including signal requirements.
How to measure electrical resistance, with warnings about applying external voltage.
Steps for testing the forward voltage drop and reverse characteristics of diodes.
Procedure for checking electrical continuity using audible beeps and a continuity lamp.
Instructions for measuring capacitance, including discharge precautions and suitable capacitor types.
General safety and connection guidelines for measuring DC and AC current.
Detailed steps for measuring microampere and milliampere current ranges accurately.
Guide for measuring ampere current ranges, emphasizing heat generation and measurement time limits.
Overview of how to connect and use various optional probes and adapters with the multimeter.
Instructions for using the CL3000 sensor to measure AC current without breaking the circuit.
Guide for using the CL-22AD probe for measuring DC and AC currents.
Instructions for using the CL33DC probe for measuring DC current in automotive or other DC circuits.
How to use the HV-60 probe for measuring high DC voltages in specialized circuitry.
Procedures for visually inspecting the multimeter and its test leads for damage or wear.
Information regarding the process and importance of calibrating the instrument for accuracy.
Step-by-step guide for safely replacing the internal batteries and fuses.
Proper methods for cleaning the multimeter and recommended storage conditions to prevent damage.
Detailed table outlining all measurement ranges, input impedance, and accuracy specifications.
Explains the formula and method used to calculate the accuracy tolerance for measurements.
Lists overall specifications including display, sampling rate, operating conditions, power, and safety standards.
Lists optional accessories available for purchase to enhance the multimeter's functionality.
Outlines the warranty period, terms, and conditions for product defects and exclusions.
Provides instructions for requesting repairs, required information, and warranty/post-warranty service.
Provides the manufacturer's website address for support and product information.
To Next Page
