Need help?Do you have a question about the Sanwa PC7000 and is the answer not in the manual?
Provides critical safety instructions and warnings to prevent electric shock, injury, or damage to the instrument.
Details maximum rated input voltage/current and overload protection for each function to prevent damage.
Identifies and labels the physical parts of the multimeter, including display, terminals, and test leads.
Explains the meaning of various symbols, units, and indicators shown on the multimeter's LCD display.
Details how to turn the multimeter on/off and select different measurement functions using the rotary switch.
Outlines the procedure for cycling through various measurement modes within a function selector position using the SELECT button.
Essential checks to perform before using the multimeter to ensure safety and proper function.
Procedure for simultaneous measurement of AC Voltage and Frequency for Variable Frequency Drives using a Low-Pass Filter.
Procedure for simultaneous measurement of AC Voltage, Decibel (dBm), and Frequency.
Detailed steps for measuring DC Voltage, including single and dual display modes.
Instructions for measuring low DC voltages (mV), including dual display, frequency, and duty cycle functions.
Detailed steps for safely replacing the internal battery and fuses with correct specifications.
Provides comprehensive tables detailing the measurement ranges and accuracy specifications for all functions.
Provides critical safety instructions and warnings to prevent electric shock, injury, or damage to the instrument.
Details maximum rated input voltage/current and overload protection for each function to prevent damage.
Identifies and labels the physical parts of the multimeter, including display, terminals, and test leads.
Explains the meaning of various symbols, units, and indicators shown on the multimeter's LCD display.
Details how to turn the multimeter on/off and select different measurement functions using the rotary switch.
Outlines the procedure for cycling through various measurement modes within a function selector position using the SELECT button.
Essential checks to perform before using the multimeter to ensure safety and proper function.
Procedure for simultaneous measurement of AC Voltage and Frequency for Variable Frequency Drives using a Low-Pass Filter.
Procedure for simultaneous measurement of AC Voltage, Decibel (dBm), and Frequency.
Detailed steps for measuring DC Voltage, including single and dual display modes.
Instructions for measuring low DC voltages (mV), including dual display, frequency, and duty cycle functions.
Detailed steps for safely replacing the internal battery and fuses with correct specifications.
Provides comprehensive tables detailing the measurement ranges and accuracy specifications for all functions.
General| Continuity Buzzer | Yes |
|---|---|
| Diode Test | Yes |
| Data Hold | Yes |
| Auto Power Off | Yes |
| AC Current Range | 50μA to 10A |
| Safety Standard | IEC 61010-1 CAT III 600V |
| Temperature Range | -50°C to 1000°C (-58°F to 1832°F) |
To Next Page
