Safety, Operation and Maintenance Manual-07.2016
1-3
1.Introduction
1.1 Overview
The explanations, values, and illustrations in this manual have been prepared based on the latest
information available as of the date of its publication. Continuing improvements in the design of this
machine may lead to additional changes that are not reflected in this manual. Consult SANYI or
your SANYI distributor for the latest available information concerning your machine or with ques-
tions regarding information contained in this manual.
This manual gives details of the operation and methods of inspection and maintenance for this ma-
chine that must be obeyed in order to use the machine safely. Most accidents are caused by the
failure to follow fundamental safety rules for the operation and maintenance of machines.
Read, understand and follow all precautions and warnings in this manual and on the machine be-
fore performing operation and maintenance. Failure to do so may result in serious injury or death.
SANYI cannot predict every circumstance that might involve a potential hazard when the machine
is used. Therefore, the safety messages in this manual and on the machine may not include all
possible safety precautions.
If you carry out any operation, inspection, or maintenance under conditions that are not described
in this manual, understand that it is your responsibility to take the necessary precautions to ensure
safety. In no event should you or others engage in the prohibited uses or actions described in this
manual. If the machine is operated mistakenly when carrying out inspection and maintenance,
there is danger that it may lead to serious injury or death.
If you sell the machine, be sure to give this manual to the new owner together with the machine, so
that all relevant personnel can read it at any time.
If this manual is lost or damaged, contact your distributor immediately to arrange for its replace-
ment. To ensure that the correct manual is sent, check the serial number of the machine and in-
form your SANYI distributor.
The numbers in the illustrations correspond to the numbers in ( ) in the text.
(For example: 1→⑴)
The letters in the illustrations correspond to the letters in ○ in the text.
(For example: A→ )
SANYI delivers machines that comply with all applicable regulations and standards of the country
to which it has been shipped. If this machine has been purchased in another country, it may lack
certain safety devices and specifications that are necessary for use in your country. If there is any
question about whether your product complies with the applicable standards and regulations of
your country, consult SANYI Mining Equipment Co. or your SANYI distributor before operating the
machine.
SRT95C Off-Highway Truck
Introduction
To Next Page
