SANYI SRT95C - Machine Information; Product Identification Plate

Safety, Operation and Maintenance Manual-07.2016
1-7
installed as standard. Please be fully aware that there are places that cannot be seen when oper-
ating the machine.
Fig.1-4
1.8 Machine information
1.8.1 Machine information
The product NO. and model numbers on the components are the only numbers that your SANYI
distributor will need when ordering replacement parts or requiring assistance for your equipment. It
is a good idea to record this information in this manual for future use. Below are the locations of
the data plates.
1.8.2 Product identification plate
It is located on the left front end of the frame.
B
B
B
B
B
B
B
B
R 12m
SRT95C Off-Highway Truck
Introduction