Sanyo 14MT2 - Controls on the TV Set.00

12
Auto Tuning/Sorting
MANUAL 12
For models 14MT2, 25MT2, 28MT2
This
TV
has
been
designed
to
control
all
of
the
functions
by
using
the
remote
control
handset.
But,
if
the
remote
control
handset
is
not
near
you
or
does
not
operate
properly
because
of
weak
batterries,
you
can
control
the
following
functions
by
using
the
contro!
buttons
on the
TV
set.
@ Function
When
you
press
the
F/M
button
repeatedly,
the
sound
or
picture
control
will
be
selected.
(Same
operation
of
the
FL.J
button
on
the
remote
control
transmitter.)
@ Memory
When you press the ©/PT button while the screen display is
still on the screen, the current control levels will be stored into
the memory.
@ Presetting
When you press and hold the ©/PT button for more than 2
seconds in the TV mode, the TV set enters to the presetting
mode. Press this button repeatedly, the mode changes as
illustrated.
@ Searching for a station
When you press the —al+ 6, - 1 button in the preset
mode, the TV set will search a station.
@ Store a station into the programme position
When you press the F/M button in the presetting mode, a
tuned station will be stored to the selected programme position.