Notes on handling compact discs
Do not expose the disc to direct sunlight, high humidity or high
temperatures for extended periods of time.
Discs should be returned to their cases after use.
Do not apply paper or write anything on the disc surface.
Handle the disc by its edge. Do not touch the playing surface (glossy
side).
Fingerprints and dust should be carefully wiped off the playing
surface of the disc with a soft cloth.
Wipe in a straight motion from the centre to the outside of the disc.
Never use chemicals such as record cleaning sprays, antistatic sprays
or fluids, benzine or thinner to clean compact discs.
Temporarily stopping play
Press the PLAY/PAUSE switch. “ b “ blinks on the display. To resume
play, press the switch again.
Skip play
To skip to track 6 while track 3 is playing, press the W / ~ SKlp/
SEARCH switch repeatedly until “6” appears in TRACK on the display.
To skip back to track 3 while track6 is playing, press the K / 44 SKIP/
SEARCH switch repeatedly until “3” appears.
Search (forward/reverse)
Ifthe ~ / ~ or w /44 SKIP/SEARCH switch is pressed during
play, the player will search at high speed in the forward or reverse
direction while the switch is being pressed. When the switch is released,
normal play will continue.
Random play
Press the RANDOM switch to begin random play. The player will auto-
matically select and play tracks on the disc at random. “RANDOM”
appears on the display.
Ifthe RANDOM switch is pressed during random play, the player will
select the next random track.
Repeat play
Press the REPEAT switch during play. The player will play all the tracks,
all the programmed tracks or all the random play tracks repeatedly.
“REPEAT” appears on the display.
To cancel repeat play, press the REPEAT switch again. “REPEAT”
disappears.
PROGRAMMED PLAY
Up to 24 selections on a disc can be programmed for play in any order.
To begin the programming procedure, select “CD” function first.
- The tracks are programmed in the stop mode.
- The same track can be programmed more than once.
Example:
To programme tracks 5,2,6 and 10
1. Press the CD MEMORY switch.
1
Pr. 1
\l/
TR4CK
PRCI$ . 12345678910
2.
3,
4.
5,
6,
7
Select track 5 by pressing the w / ~ SKIP/SEARCH switch 4
times.
5 Pr. 1
TRAcK
12345678910
Press the CD MEMORY switch.
5
Pr. 1
TR4CK
PROG. 5
Select track 2 by pressing the K /44 SKIP/SEARCH switch 3
times.
~
Press the CD MEMORY switch.
~d
The remaining tracks are programmed in the same way.
Press the PLAY/PAUSE switch to start play.
~
When all programmed selections have played, the player stops
automatically. The total programmed time appears.
Ifthe total programmed time exceeds 99 minutes 59 seconds, “NO
dlSP” appears.
- The programme contents are retained in memory.
Any attempt to programme more than 24 selections will result in
“FULL” being displayed and discontinuation of the programming.
The programme is cleared in the following cases:
When the STOP/CLEAR switch is pressed in the stop mode
When the EDIT switch is pressed in the stop mode
When the ~ switch is pressed
When the mains lead has been disconnected
Checking the programme
Each time the CD MEMORY switch is pressed in the stop mode, the
programmed details sequentially appear on the display.
Changing a programme
To add a new selection to a programme:
1. In the stop mode, press the CD MEMORY switch repeatedly until
“.. . ... .
“ is displayed.
2. Select a track number as explained above.
To change a selection:
1. In the stop mode, press the CD MEMORY switch repeatedly until the
selection to be replaced is displayed.
2. Select a track number as explained above.
Note:
Programmed details cannot be partially deleted or inserted.
-8-
To Next Page
Loading...
