Sanyo DC-DA170 - Schematic Diagram (Tuner for XE)

- 23 -- 22 -
SCHEMATIC DIAGRAM (TUNER for XE)
PRODUCT SAFETY NOTICE
Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol
!
!!
in the parts list and the schematic diagram
designated components in which safety can be of special significance. When replacing a component identified by
!
!!
, use only the replacement parts designated,
or parts with the same ratings of resistance, wattage or voltage that are designated in the parts list in this manual. Leakage-current or resistance measurements
must be made to determine that exposed parts are acceptably insulated from the supply circuit before returning the product to the customer.
This is a basic schematic diagram.