GETTING STARTED
POSITIONING THE LCD TV
Always use an appropriate table or stand when
positioning your TV. For best viewing, avoid locat-
ing the TV where direct sunlight or indoor lighting
will fall on the screen.
DETACHING THE TV STAND
(Optional)
Tools Needed: Phillips screwdriver
Important Note: Position TV face down on a
padded or cushioned surface to protect the
screen and finish.
1
Remove four (4) screws from the metal
bracket. CAUTION: Hold the stand firmly as
you remove the last screw.
2
Carefully remove the TV stand.
5
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
INSTALLING BATTERIES IN THE
REMOTE CONTROL
Use 2 “AAA” batteries (Not supplied).
Be sure batteries are installed correctly.
Notes:
– Do not mix old batteries with new ones or
mix different types of batteries together.
– Remove the batteries if the remote control
will not be used for a month or more. Weak
batteries may leak and cause damage.
(Normal battery life is roughly six months.)
IMPORTANT NOTE: Spent or discharged batteries must be recycled or
disposed properly in compliance with all applicable laws. For detailed
information, contact your local County Solid Waste Authority.
To Next Page
Loading...
