About Configuration via Menus
17
English
■ To copy the settings you configured via
menus to other recorders:
When you are using more than one recorders, you can copy the
settings you configured via menus on the main recorder and load the
settings onto other recorders so that you can easily and quickly
configure them.
Insert a CompactFlash card into the
CompactFlash card slot of the main recorder.
Press the MENU button to open the MAIN MENU
screen, and choose “7. COPY MENU SETTINGS”.
qShows the firmware version number.
wAllows you to save the settings onto the card.
eAllows you to load the settings from the card.
rAllows you to copy the recording area settings as well.
¡If you set this option to “YES”, the existing video data are erased
(the hard disk is initialized) before loading the settings from the
CompactFlash card.
Choose “SAVE MENUS TO CF” and turn the S-dial
clockwise.
A WARNING screen appears. Choose “YES”, and
then turn the S-dial clockwise.
a The settings will be saved onto the card.
Remove the CompactFlash card from the main
recorder, and insert it into the CompactFlash card
slot of the destination recorder.
Press the MENU button to open the MAIN MENU
screen, and choose “7. COPY MENU SETTINGS”.
Choose “LOAD MENUS FROM CF” and turn the
S-dial clockwise.
A WARNING screen appears. Choose “YES”, and
then turn the S-dial clockwise.
a The menu setting data on the CompactFlash card is
loaded onto the destination recorder. After the loading
completes, the destination recorder restarts and begins
displaying the live video.
8
7
6
5
4
3
To Previous Page
Loading...
