About Configuration via Menus
16
English
■ To adjust the live video color tone:
Press the MENU button to open the MAIN MENU
screen, and choose “4. SCREEN SET”.
On the SCREEN SET screen, choose “4. COLOR
LEVEL SET”.
Use the CAMERA SELECT button to specify the
number of camera whose color tone you want to
adjust.
Set the color tone.
The higher the value is, the more dense the image will be.
When you are done, press the EXIT/OSD button.
5
<COLOR LEVEL SET>
CH02 COLOR LEVEL : 5
4
3
2
1
■ To check when any power failure occurred or
how long the hard disk has been in use:
Press the MENU button to open the MAIN MENU
screen, and choose “5. POWER LOSS/USED
TIME”.
Review the information on the screen.
qPower failure information (number of occurrences)
wDate/time at which the power was lost and restored (for the
most recent four occurrences)
eThe in-use time for the hard disk and the total power-on
time for the DVR
When you are done, press the EXIT/OSD button.
■ To review the initialization log:
Press the MENU button to open the MAIN MENU
screen, and choose “6. INITIALIZATION LOG”.
Review the information on the screen.
qDate/time at which the disk was initialized
wInitialized area
eDescription
When you are done, press the EXIT/OSD button.
3
<INITIALIZATION LOG>
DATE TIME AREA
10-11 11:55 ALL AREAS (INITIALIZED)
----- --:-- ------ (------)
----- --:-- ------ (------)
----- --:-- ------ (------)
----- --:-- ------ (------)
----- --:-- ------ (------)
----- --:-- ------ (------)
----- --:-- ------ (------)
q
w
e
<POWER LOSS/USED TIME>
POWER LOSS RECOVER
#011 14-01 19:15 15-01 09:55
13-01 21:13 14-01 09:21
03-01 18:48 05-01 08:56
01-01 09:49 03-01 10:32
USED TIME DISK1 USE : 00096H
DISK2 USE : -----H
POWER : 00096H
F/W: M 0.30-00 / S 0.20-04
q
w
e
To Next Page
Loading...
