REPLAY
ZOOM ANGLE
ON SCREEN
SUBTITLE
CHANGE
SUBTITLE
ON/OFF
TOP MENU
SETUP
ENT
o
a
p
Number
buttons
Before Setting
• Initial setting is “CC2” on this unit.
• Please set “CC2” or “C2” (Closed caption on channel 2) on
your TV first. For more details, please refer to your TV
instruction manual.
• Set the subtitle language to “Off”. (See page E23.)
Setting TVGuardian
®
Example:
To set “TV Mode Strict”, “TVG CC On” and “TVG CC Ch
CC2”
1. Press [SETUP] in the stop mode.
The setup screen appears.
TVGuardian
®
OPERATION
In this instruction manual, the language in on-screen display
is English. If you change the language (see page E31),
please follow the selected language in on-screen display.
Language Display Digital Out Parental
2. Press [a] to select “Parental”.
3. Press [ENT].
“Parental” screen appears.
4. Press [p] to select “TVG Mode”.
Note:
If the parental lock “
” is set, the highlighted box does not
move. You must enter the password to release the
parental lock first. See page E34.
5. Press [ENT].
The submenu (“Off”, “Moderate” and “Strict”) appears.
6. Press [p] to select “Strict”.
Password
Level
TVG Mode
TVG CC
TVG CC Ch
----
Off
Off
Off
CC2
Off
Moderate
Strict
Note:
If “TVG Mode” is not necessary, select “Off”.
7. Press [ENT].
“TVG Mode Strict” remains.
8. Press [p] to select “TVG CC (Closed Caption)”.
9. Press [ENT].
The submenu (“Off”, “CUSS” and “On”) appears.
10. Press [p] to select “On”.
Password
Level
TVG Mode
TVG CC
TVG CC Ch
----
Off
Strict
Off
CC2
Off
CUSS
On
Note:
If “TVG CC Off” is selected, closed caption may not appear
at CC2 mode on your TV screen.
11. Press [ENT].
“TVG CC On” remains.
12. Press [p] to select “TVG CC Ch (Output Channel)”.
13. Press [ENT].
The submenu (“CC1” and “CC2”) appears.
14. Press [p] to select “CC2”.
Notes:
• This is channel number setting for your TV. For more
details, please refer to your TV instruction manual.
• In “
” mode (PROGRESSIVE mode), the closed
caption may not appear on the TV screen. Please refer
to page E15.
15. Press [ENT].
“TVG CC Ch CC2” remains.
16. After step 15, you must set the parental lock as shown
below.
(For more details, please refer to “Setting Parental” on page
E34.)
1) Press [o] to select “Level”.
2) Press [ENT] repeatedly to select the parental lock level.
3) Press [o] to select “Password ----”.
4) Enter a number in 4 digits.
5) Press [ENT].
“ ” appears.
Note:
If you do not set it, the TVGuardian does not work, and
it returns to the initial settings.
17. Press [SETUP].
The setup screen disappears.
To Next Page
Loading...
Need help?
General
