No
Yes
OK
OK
OK
Previous
Previous
OK
Previous
OK
Previous
By connecting this unit to the Internet,
the following functions are available :
To use the above functions,
please setup with Network Settings.
USB Setup
Netflix VUDU YouTube
Disc
Next
on
Off
Page: 2/5
Switch Voice Guide On or Off.
Sets On the Voice Guide, "Audio Output/HDMI"
setting will set to "PCM" automatically. Some audio
will be output in 2ch format. If Voice Guide is ON, it
will not be able to set the "Audio Output/HDMI".
Easy Setup
Next
Page: 1/5
Language Setting
Please select your language for on-screen
display. If you want to use the Voice Guide
function, please set to "English" or
"Español".
Easy Setup
Español
English
Français
Next
Page: 3/5
HDMI CEC Setting
Set up HDMI CEC function.
For details, please check the owner’s manual.
Easy Setup
on
Off
Next
Page: 4/5
Automatically check for latest software
When connected to the internet, the unit
will automatically check for the latest
software.
Easy Setup
on
Off
Next
Page: 5/5
Network Connection Set up
Easy Setup
Setupnow
Not now
SSID Security Signal Strength
WPA2-PSK
WPA-PSK
WPA2-PSK
WPA2-PSK
WPA-PSK
WPA2-PSK
100%
100%
100%
100%
100%
100%
access_point_
access_poi...
access_poi...
access_poi...
access_poi...
access_poi...
WPA2-PSK
Exit
Next
Previous
_
Connection Failed.
OK
Scanning...
Cancel
abcde123
f
g
hi j456
klmno789
pq r s
t
.
@0
uvwxy z
Back Space Enter Clear
Connection success and IP is obtained.
OK
PBC
PIN
Please press Push Button on the Access Point within
120 seconds after you select the "Next" Button below.
WPS(Wi-Fi Protected Setup)
PreviousRefresh Next
Setup
EthernetInterface
Language
Streaming Co...
Security
System
Wireless Setting
Network Status
Connection Test
IP Setting
Network
Wireless
Setup
Language
Streaming Co...
Security
System
Network
Wireless Setting
Scan
Manual
Auto
Exit Next
Setup
Language
Streaming Co...
Security
System
Wireless Setting
Network Status
IP Setting
MoreNetwork Interface
Connection Test
Waiting
...
Cancel
ABC
Scan
rear
bottom
cover
Check
SSID and
KEY information (Password)
for your router.
example:
SSID : XXXXXXXXXXXX
KEY : XXXXXXXXXXXX
PIN : XXXXXXXXXXXX
Auto
Please verify your settings and try again.
For detailed instructions, refer to the Online
Owner's manual.
www.sanyo-av.com
Wired
Wireless
Wireless network setting is
completed.You are ready to enjoy
network features over Wirelessly!
PBC
Please push PBC button
on your access point.
WPA2-PSK
Exit
**********
Previous
Next
Select “Enter”,
then press
Select “Enter”,
then press
For product recycling information, please visit -
© 2017 Funai Electric Co., Ltd.
Install 2 AAA (1.5V) batteries (not included)
Press to turn On the unit, or to
switch the unit into Standby
mode. (To completely turn Off
the unit, you must unplug the
Press to confi rm or select
During playback, press to
confi gure playback functions
such as Search, Repeat, Angle,
Press to start playback or
Press to select Subtitles or
Audio Channel (such as audio
Press to Open or Close the disc
Press to display the Home
previously displayed menu or
HDMI1
Internet
Wired Connection
Modem or
Router
Wireless Connection
Wireless broadband
router
HDMI cable
(not included)
or
LAN cable (not included)
AC
plug
POWER INPUT / SOURCE
Active Internet connection is required to your
modem or broadband router. If there is
trouble connecting to the Internet, refer to
relevant topics in TROUBLESHOOTING.
1
2
3 4
Wireless and Wired Connections
You need to confi gure network settings in order to use Internet services.
Problem Tip
Check if the AC power cord is properly connected.
Unplug the AC power cord, and wait for about 5-10 seconds. Plug
it back in and attempt to Power On the unit.
Make sure both the TV and Blu-ray Disc™ player are turned On.
Confi rm the connections to the TV are made properly as shown in
CONNECTIONS, then select the input on your TV.
Confi rm that the player’s AC power cord is plugged into a power outlet.
Check the batteries in the remote control, and make sure they are
inserted properly by + or - symbols.
Make sure the HDMI cable is not plugged into an HDMI-DVI
adapter which does not handle Digital sound.
Make sure that the product supports the disc.
Check the region code of the disc. This unit supports the following
Check to see if the modem / router has Power turned On.
Confi rm, if the Internet light is showing activity (light blinking) on
Turn Off this unit and the modem/router (if it has a Power button),
then unplug their AC cords. After 30 seconds, plug them back in
and turn the devices back On. If you have a telephone / Internet
modem with your cable service, then you may have to use its reset
button or remove the backup battery to reset this type of modem.
Now wait for the lights to show activity and try reconnecting.
Check the cable connections to the router when connecting with a
Confi rm the security protocol of the router. WPS (Wi-Fi Proteced
Setup) cannot be used if the security protocol is set to “WEP”.
If none of the above suggestions fi x the issue, please contact your
ISP (Internet Service Provider) for further assistance.
Once you have activated the wireless connection, please wait 30
seconds for the connection to be established after turning On the
unit, before trying to access network features such as BD-Live™
and the third-party network services.
If you do not find a solution above, please visit our website
www.sanyo-av.com
for the Online Owner’s Manual.
Please download it and then refer to “TROUBLESHOOTING” section
SANYO is a registered trademark of SANYO Electric Co., Ltd. and is used by Funai Electric Co., Ltd. and Funai Corporation, Inc. under license
from SANYO Electric Co., Ltd. Any liability related to SANYO products, including design and quality, is the sole responsibility of Funai Electric
Co., Ltd. and Funai Corporation, Inc. Please contact Funai Corporation, Inc. for any questions or claims related to SANYO products:
Turn On the unit and your TV, then select the input on your TV.
Automatically Check Software
DISC USB Setup
NETFLIX VUDU YouTube
If your router has a PBC* (Push Button Confi guration) button, you can use “PBC” which is the easiest way to set
up a wireless connection.
If your router does not have it, please use the “Scan” setup.
* PBC button may be called WPS button on your wireless router.
The unit automatically searches
The unit automatically searches
for nearby wireless access points.for nearby wireless access points.
Wireless connection process Wireless connection process
Connection failure message
Connection failure message
Connection success message
Connection success message
(wireless access point)(wireless access point)
Select “Network”Select “Network”
Connect a LAN cable, and then confi guratio
Connect a LAN cable, and then confi gurat
nnect a LAN cable, and then confi gurati
onnect a LAN cable, and then configurati
Connect a LAN cable, and then confi guration
will automatically be performed.
will automatically be performed.
How to check the connection
Select the desired wireless Select the desired wireless
setup method.setup method.
wireless setup method.wireless setup method.
At the confirmationAt the confirmation
Register Online at www.sanyo-av.com/support/ today to get the most benefits from your purchase.
Registering your model with SANYO makes you eligible for all of the valuable benefits such
as software upgrades and important product notifications.
Register Online at
www.sanyo-av.com/support/
Quick Start Guide
Blu-ray Disc™ & DVD Player with Built-in Wi-Fi
C
onnections
I
nitial
S
etup
R
emote
C
ontrol
N
etwork
S
etup
T
roubleshooting
• If you are experiencing signal issues with
your wireless connection, please confirm
that your wireless router is placed close
• Do not mix old and new batteries.
• Do not mix alkaline, standard
(carbon-zinc) or rechargeable (ni-cad,
ni-mh, Li-ion, etc.) batteries.
1 2
3
N
etwork
S
etup
3
See the Online Owner’s Manual for details:
www.sanyo-av.com
1
www.sanyo-av.com
2
3
4
Select the Manual and click on
To Next Page
Need help?
General
