EasyManuals Logo

Sanyo FWBP706F Setup Manual

Sanyo FWBP706F
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
No Yes
Next
Previous
Español
Next
Page: 1/4 Easy Setup
NextPrevious
Not now
NextPrevious
On
This Wizard will go through the initial set up of this
BD Player. For detail settings,
please visit the Home Menu after this set up
is completed.
Choose OSD language for all OSD windows,
menu, etc...
Welcome to the Set up Wizard!
English
Français
Language Setting
Page: 2/4 Easy Setup
Page: 3/4 Easy Setup
Off
Set up HDMI CEC function.
For details, please check the owner’s manual.
HDMI CEC Setting
By connecting this unit to the Internet,
the following functions are available :
To use the above functions,
please setup with Network Settings.
Network Connection Set up
Page: 4/4 Easy Setup
Set up now
USB Setup
Netflix VUDU YouTube
Disc
Setup
WPA2-PSK
Exit
Network
Language
Streaming Co...
Security
System
EthernetInterface
Language
Streaming Co...
Security
System
Setup
Wireless Setting
Network Status
Connection Test
IP Setting
Network
Language
Streaming Co...
Security
System
Setup
Network
Wireless Setting
Scan
Manual
Auto
Scanning...
Setup
SSID Security Signal Strength
Setup
abc de123
fghij456
klmno789
pqr s
t
.@0
uvwxyz
Back Space Enter Clear
|
ABC
Setup
WPA2-PSK
Exit
**********
Setup
Waiting...
Language
Streaming Co...
Security
System
Network
PBC
PIN
Please press Push Button on the Access Point within
120 seconds after you select the "Next" Button below.
Language
Streaming Co...
Security
System
Wireless Setting
Network Status
IP Setting
MoreNetwork Interface
Connection Test
Setup
Connection Failed.
Setup
Connection success and IP is obtained.
Wireless
Exit Next
WPS(Wi-Fi Protected Setup)
PreviousRefresh Next
Cancel
Network
Language
Streaming Co...
Security
System
Network
Language
Streaming Co...
Security
System
WPA2-PSK
WPA-PSK
WPA2-PSK
WPA2-PSK
WPA-PSK
WPA2-PSK
100%
100%
100%
100%
100%
100%
access_point_
access_poi...
access_poi...
access_poi...
access_poi...
access_poi...
Next
Previous
Network
Language
Streaming Co...
Security
System
Cancel
Previous
Next
Network
Language
Streaming Co...
Security
System
Network
Language
Streaming Co...
Security
System
Network
Language
Streaming Co...
Security
System
OK
OK
Setup
Setup
Scan
Auto
Please verify your settings and try again.
For detailed instructions, refer to the Online Owner's manual.
sanyo-av.com
Wired
Wireless network setting is completed.
You are ready to enjoy network features over Wirelessly!
Wireless
_
Please push PBC button
on your access point.
Select Enter,
then press
Select Enter,
then press
PBC
For product recycling information, please visit -
sanyo-av.com
y
Click on
© 2016 Funai Electric Co., Ltd.
Printed in China
2VMN00250
★★★★★
INSERT BATTERIES
Install 2 AAA (1.5V) batteries
(not supplied)
1. POWER-ON
Press to turn On the unit, or to
switch the unit into Standby
mode. (To completely turn Off
the unit, you must unplug the
AC power cord.)
2. CURSOR
Press to select items or
settings.
3. OK
Press to confi rm or select
menu items.
4. MODE
During playback, press to
display the Play Menu to
confi gure playback functions
such as Search, Repeat, Angle,
etc.
5. PLAY/PAUSE
Press to start playback or
resume playback.
Press to Pause playback.
6. SUBTITLE/AUDIO
Press to select Subtitles or
Audio Channel (such as audio
languages) on a disc.
7. OPEN/CLOSE
Press to Open or Close the disc
tray.
8. HOME
Press to display the Home
Menu.
9. RETURN
Press to Return to the
previously displayed menu or
screen function.
10. YouTube/NETFLIX/VUDU
Press to Launch VOD.
1 2 3
2
1
3
8
7
9
10
4
5
6
*2VMN00250*
Internet
Wired Connection
Modem or
Router
Wireless Connection
Wireless broadband
router
HDMI cable
(not supplied)
or
LAN cable (not supplied)
AC plug
Active Internet connection is required to your
modem or broadband router. If there is
trouble connecting to the Internet, refer to
relevant topics in TROUBLESHOOTING.
1
2
Wireless and Wired Connections
You need to confi gure network settings in order to use Internet services.
Problem Tip
No power.
Check if the AC power cord is properly connected.
Unplug the AC power cord, and wait for about 5-10 seconds. Plug
it back in and attempt to Power On the unit.
No sound or
picture.
Make sure both the TV and Blu-ray Disc™ player are turned On.
Con rm the connections to the TV are made properly as shown in
CONNECTIONS, then select the input on your TV.
No reaction
to the remote
control.
Con rm that the player’s AC power cord is plugged into a power outlet.
Check the batteries in the remote control, and make sure they are
inserted properly by + or - symbols.
No sound
or distorted
sound.
Adjust the volume.
Make sure the HDMI cable is not plugged into an HDMI-DVI
adapter which does not handle Digital sound.
Cannot play
back a disc.
Make sure that the product supports the disc.
Check the region code of the disc. This unit supports the following
region codes.
-
Blu-ray Disc™: “A”
-
DVD: “ALL” or “1”
Clean the disc.
Cannot
connect to
the network.
Check to see if the modem / router has Power turned On.
Con rm, if the Internet light is showing activity (light blinking) on
the modem / router.
Turn Off this unit and the modem/router (if it has a Power button),
then unplug their AC cords. After 30 seconds, plug them back in
and turn the devices back On. If you have a telephone / Internet
modem with your cable service, then you may have to use its reset
button or remove the backup battery to reset this type of modem.
Now wait for the lights to show activity and try reconnecting.
Check the cable connections to the router when connecting with a
LAN cable.
Con rm the security protocol of the router. WPS (Wi-Fi Proteced
Setup) cannot be used if the security protocol is set to “WEP”.
If none of the above suggestions x the issue, please contact your
ISP (Internet Service Provider) for further assistance.
Once you have activated the wireless connection, please wait 30
seconds for the connection to be established after turning On the
unit, before trying to access network features such as BD-Live™
and the third-party network services.
If you do not find a solution above, please visit our website
sanyo-av.com
for the Online Owner’s Manual.
Please download it and then refer to “TROUBLESHOOTING” section
for more information.
SANYO is a registered trademark of SANYO Electric Co., Ltd. and is used by Funai Electric
Co., Ltd. and Funai Corporation, Inc. under license from SANYO Electric Co., Ltd.
Any liability related to SANYO products, including design and quality, is the sole
responsibility of Funai Electric Co., Ltd. and Funai Corporation, Inc.
Please contact Funai Corporation, Inc. for any questions or claims related to SANYO
products: sanyo av.com
products: sanyo-av com
P706F
FW
BP
Turn On the unit and your TV, then select the input on your TV.
Welcome
HDMI CEC Setting
HOME MENU
Language Selection
Network Setting
DISC USB Setup
NETFLIX VUDU YouTube
If your router has a PBC* (Push Button Configuration)
button, you can use “PBC” which is the easiest way to set
up a wireless connection.
If your router does not have it, please use the “Scan” setup.
* PBC button may be called WPS button on your wireless
router.
The unit automatically searches for The unit automatically searches for
nearby wireless access points.
nearby wireless access points.
Wireless connection process now
ss connection process
s connection process
s
ss connection process no
connection proce
ele
t
e
e
Wireless connection process
t
Wireless connection process now
starts.starts.
Connection failure message appears.Connection failure message appears.
Connection success message appears.Connection success message appears.
Select the SSID (wireless
Select the SSID (wireless
access point) to connect to.access point) to connect to.
Password entry screen
Password entry screen
appears.appears.
work”
e
et
Select “Ne
o
elect Ne
tw
S
Select “Ne
etwor
Select “Ne
S
k
S
Select “Network”
AA
e
Interface
“Interface
AA
“Wireless”.“Wireless”.
Select “Network”Select “Network”
A
“Interface”
A
”Ethernet”.
Connect a LAN cable, and then confi guration
Connect a LAN cable, and then confi guration
will automatically be performed.will automatically be performed.
How to check the connection
Select “Network”
A
“Connection Test”.
esired wireless
he d
d
Select the
desired wireless
Select the
S
Select th
esired wirele
elect the
sired wireless
es
S
Select the desired wireless
setup method.
setup method
d
setup met
setup method.
Select the desired wireless
Select the desired wireless
setup method.setup method.
Enter the password of your Enter the password of your
wireless router.wireless router.
At the confi rmation screen,
At the confi rmation screen,
select select
[Next]
[Next]
to move on.
to move on.
Register Online at
sanyo-av.com/support/
today to get the most benefits from your purchase.
Registering your model with SANYO makes you eligible for all of the valuable benefits such
as software upgrades and important product notifications.
Register Online at
sanyo-av.com/support/
ypp
Setup Manual
Blu-ray Disc™ /
DVD Player
C
onnections
I
nitial
S
etup
R
emote
C
ontrol
N
etwork
S
etup
N
etwork
S
etup
T
roubleshooting
NOTE(
S
):
If you are experiencing signal issues
with
y
our wireless connection,
p
lease
con
f
irm that your wireless router is
placed close enou
g
h to the unit
.
1 2
3
3
See the Online Owner’s Manual for details:
sanyo-av.com
1
Please visit website
sanyo-av.com
2
Select Download.
3
3
Type in the Model #
“FWBP706F”
and click
“Search”
.
4
Select the Manual and click on
“Download”
.

Other manuals for Sanyo FWBP706F

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sanyo FWBP706F and is the answer not in the manual?

Sanyo FWBP706F Specifications

General IconGeneral
BrandSanyo
ModelFWBP706F
CategoryBlu-ray Player
LanguageEnglish

Related product manuals