Why Sanyo Blu-ray Player not reacting to the remote control?
M
Melissa ClarkAug 14, 2025
If your Sanyo Blu-ray Player isn't responding to the remote control, first, try reducing the distance between the remote and the infrared sensor window on the player. Make sure the player's AC power cord is plugged into a power outlet. Also, check the batteries in the remote control, ensuring they are correctly inserted according to the + and - symbols.
C
Catherine BensonAug 17, 2025
How to troubleshoot no power on Sanyo FWBP706F Blu-ray Player?
E
Ethan WintersAug 17, 2025
If your Sanyo Blu-ray Player has no power, first ensure the AC power cord is properly connected. If it is, try plugging the player into another power outlet. As a last resort, unplug the AC power cord, wait 5-10 seconds, and then plug it back in to try powering on the unit.
M
Monica HoganAug 20, 2025
Why is there no sound or picture from my Sanyo FWBP706F Blu-ray Player?
M
mwagnerAug 20, 2025
If you're getting no sound or picture from your Sanyo Blu-ray Player, make sure both the TV and the Blu-ray Player are turned on. Also, double-check that the connections to the TV are correctly set up. Finally, ensure that the connected TV or another device supports HDCP, as the unit will not output a video signal without HDCP support.
H
Heather JonesAug 25, 2025
What to do if Sanyo Blu-ray Player cannot connect to the network?
H
hodgesronnieAug 25, 2025
If your Sanyo Blu-ray Player cannot connect to the network, check the following:
* Ensure the modem/router has power and the Ethernet cable is properly connected.
* Confirm the Internet light is active on the modem/router.
* Check network settings on the Blu-ray player.
* Power cycle both the Blu-ray player and the modem/router by turning them off, unplugging them for 30 seconds, and then plugging them back in and turning them on. For telephone/internet modems, you may need to use the reset button or remove the backup battery.
* Verify the cable connection to the router if using an Ethernet cable.
* Confirm the Network Status in the Setup menu.
* Ensure the DHCP function is turned on in the router settings.
H
hunterscottAug 27, 2025
Why is there no audio or video signal from my Sanyo Blu-ray Player via HDMI?
S
Stacy FriedmanAug 27, 2025
If there's no audio or video signal on your display device via HDMI cable from your Sanyo Blu-ray Player, it might be due to the unit being connected to a non-certified HDMI device, which prevents signal transmission. Ensure the display device is on the correct input/video source. Try performing an HDMI hotplug by disconnecting and reconnecting the HDMI cable with both devices turned on. Check for TV software updates from the TV manufacturer and verify that the HDMI cable is a certified version.
T
Terri JohnsonAug 31, 2025
What to do if Sanyo Blu-ray Player cannot play a disc?
D
Donald FranklinAug 31, 2025
If your Sanyo Blu-ray Player cannot play back a disc, first ensure that the unit supports the disc type. Check the region code for the disc, ensuring it's compatible with the player's supported region codes (Blu-ray Disc: “A”, DVD: “ALL” or “1”). If it's a DVD-RW/-R, make sure the disc is finalized. Clean the disc. If the disc is a newer title, a software update might be needed.
R
ryan96Sep 3, 2025
Why no high-definition video signal from Sanyo Blu-ray Player?
L
Lori MendozaSep 3, 2025
If you are not getting a high-definition video signal on your TV screen from your Sanyo Blu-ray Player, check if the disc contains high-definition video and if your TV supports high-definition video. High-definition video is only available when both the disc and the TV support it.
K
Kiara MoranSep 6, 2025
Why Sanyo Blu-ray Player cannot connect to internet after connection test passed?
A
aliceburkeSep 6, 2025
If your Sanyo Blu-ray Player passes the connection test but still cannot connect to the internet, ensure that the Ethernet cable is properly connected to the modem/router. Also, confirm that another device, such as a PC, can connect to the internet using the same connection.
E
Eric SingletonSep 9, 2025
How to eject a stuck Blu-ray disc from Sanyo Blu-ray Player?
J
Jonathan DeanSep 9, 2025
If your Sanyo Blu-ray Player cannot load a Blu-ray Disc and the disc tray is stuck, unplug the unit from the AC outlet for 20 seconds. Then, plug it back in and press the open/close button on the unit to eject the disc.