–
11
–
EN
Adjust the volume
1
To increase or decrease the volume, press VOL +/
-
on the remote control.
Volume levels LED lighting patterns LED behavior
0 - 5
(6 levels)
Lights up for 3 seconds
(default: level 13)
6 - 11
(6 levels)
12 - 17
(6 levels)
18 - 23
(6 levels)
24 - 29
(6 levels)
• When pressing VOL+/
-
, the indicator(s) will show the current volume. Pressing VOL+/
-
while the current volume is
shown will increase/decrease the volume.
• Pressing and holding VOL+ or VOL
-
will increase or decrease the volume and the Indicator(s) will blink. When the
volume has reached the maximum or minimum, the indicator(s) will stop blinking.
2
To mute the sound, press on the remote control.
Volume levels LED lighting patterns LED behavior
Mute
e.g.) When OPTICAL was selected
Red indicator blinks continuously.
• To restore the sound, press
again or press VOL +/
-
.
NOTE(S)
• The volume might be influenced by MP3 or Bluetooth player. If the volume is too low, adjust the volume on the
connected device.
• If the volume level is set above 18 when the soundbar is turned off, the volume will automatically be reset to 18
when the soundbar is turned back on.
To Next Page
Loading...
