Sanyo FWSB405F A - USEFUL TIPS AND INSTALLATION; Resetting to Factory Default Mode

–
15
–
EN
USEFUL TIPS
Resetting to the factory default mode
You can delete the Bluetooth profiles that are stored on the unit by resetting to the factory default mode.
1
Press to turn the soundbar on.
2
Press PAIR 5 times within 3 seconds.
• All LED indicators will blink during resetting.
After completing resetting, the soundbar will be shut down and go into standby mode.
• All registered Bluetooth profiles will be deleted.
Pairing the Bluetooth setting to this unit again when you want to play back a music file through the Bluetooth compatible
device.