Sanyo FWSB405F A - MAKING MORE USE WITH YOUR SOUNDBAR; Pairing a Bluetooth Device; Streaming Music via Bluetooth

–
13
–
EN
MAKING MORE USE WITH YOUR SOUNDBAR
Using a Bluetooth compatible device
Pairing a Bluetooth compatible device with this unit
1
Press BLUETOOTH on the remote control to switch the soundbar to Bluetooth mode.
2
Turn your Bluetooth compatible device on and activate the Bluetooth setting.
(See the user manual of the Bluetooth compatible device on how to enable Bluetooth.)
3
On your Bluetooth compatible device search for and select “SANYO_FWSB405F” or “2.0ch
Soundbar” to pair (or register) your soundbar with your Bluetooth compatible device.
• If a passcode is requested, enter “0000”.
• If the soundbar name does not appear on the Bluetooth compatible device, press
PAIR on the remote control.
4
When the pairing is complete, your Bluetooth compatible device may show “Connected” on
the display.
Playing back a music file through Bluetooth
1
Press BLUETOOTH on the remote control to switch the soundbar to Bluetooth mode.
• The PAIR (Bluetooth) indicator will light up.
2
Turn your Bluetooth compatible device on and activate the Bluetooth setting.
(See the user manual of the Bluetooth compatible device on how to enable Bluetooth.)
• If you have already paired your Bluetooth compatible device and the device’s Bluetooth is on then the soundbar should
connect to it automatically.
• If the soundbar name does not appear on the Bluetooth compatible device, press
PAIR on the remote control.
3
Playback a music file on the connected Bluetooth compatible device.
• You may use, , and on the soundbar’s remote control once the Bluetooth compatible device is properly
connected to this soundbar.
4
To exit Bluetooth mode, press one of the other INPUT source buttons on the remote control.
Continued on next page.