To Next PageTo Next PageWhat to do if my Sanyo Car Receiver has no power?
If your Sanyo Car Receiver isn't powering on, first ensure the vehicle ignition is in the “ON” or “ACC” position. If that doesn't solve the issue, check the fuse and replace it with another 10A fuse if it's blown.
Why does the sound from my Sanyo FXD-780RDS Car Receiver CD player skip?
If you're experiencing skipping issues with the CD player in your Sanyo Car Receiver, there are a few potential causes: * The road surface may be rough: Wait for the road surface to improve before playing a disc. * The unit may not be securely mounted: Ensure the unit is securely installed, using the rear strap if your vehicle doesn't provide rear support. * The disc may be defective: Try another disc to see if the issue persists. * The disc may be dirty: Clean the disc.
How to fix no radio reception on Sanyo Car Receiver?
If your Sanyo Car Receiver isn't picking up any radio stations, make sure the antenna cable is firmly inserted into the antenna jack on the unit.
Why won't my Sanyo Car Receiver play compact discs?
If your Sanyo Car Receiver's compact disc does not play, check that the volume control is turned up. Also, verify that the +12V and ground connections are correctly wired.
What to do if Sanyo FXD-780RDS radio automatic tuning doesn't work?
If your Sanyo Car Receiver does not stop on any stations when automatic tuning is used, it may be due to weak signals. Try selecting a station using manual tuning instead.
General| Brand | Sanyo |
|---|---|
| Model | FXD-780RDS |
| Category | Car Receiver |
| Language | English |
Lists recommended manufacturers and discusses CD-R media compatibility.
Step-by-step guide on attaching, detaching, and resetting the front panel.
Details the function of the red indicator light for deterring theft.
How to turn the unit on/off, adjust volume, and mute sound.
Procedure for manually setting the clock and using RDS CT for automatic synchronization.
How to set display priority and adjust bass, treble, loudness, and balance.
Explanation of loudness effect and selection between local and distant radio signals.
Steps to adjust, memorize, and recall sound stage presets for different seats.
How the phone mute function works and how to recall the clock when ignition is off.
How to switch to radio mode and perform automatic or manual tuning.
Procedure for programming and accessing favorite radio stations using preset buttons.
How ATP searches and memorizes strong stations for familiar locations.
How to scan through stations or preset stations for a short period.
How to change displayed RDS items and select AF or TA modes for enhanced reception.
How AF automatically retunes to stronger signals and REG controls regional tuning.
Receiving traffic announcements and presetting their volume level.
How to insert/eject CDs and switch between radio and CD modes.
Methods for skipping tracks forward/backward and fast searching within a track.
How to pause, repeat tracks/discs, and play tracks in random order.
Using the scan mode to play the beginning of each track.
How to select CD changer mode and navigate between discs.
Methods for skipping tracks and fast searching when using the CD changer.
How to repeat tracks/discs or shuffle play tracks/discs from the changer.
Using scan mode to play the beginning of tracks or discs from the changer.
Common error messages for CD player and CD changer, with causes and solutions.
Information on mounting the unit level and avoiding excessive tilt during installation.
Instructions on how to safely remove the car stereo unit from its mounting.
