Sanyo FXD-MP900 User Manual

-10-
BASSXPANDER........................................................ 3
Press the SND button e for more than 1.5 second to switch ON/OFF of the BASS mode. When the BASS
mode is on, “BASS ON” is displayed and the bass enhances.
RADIO SELECTION BUTTON (BND) ........................... 4
Press the BND button f to switch from CD player mode to radio.
Each time the button is pressed, the function changes as shown below.
CD PLAYER, CD CHANGER* OR AUX SELECTION
BUTTON (CD/AUX).................................................... 5
Press the CD/AUX button g to switch from radio mode to CD, CD changer* or AUX mode.
*If a CD changer is connected.
CLOCK BUTTON (CLK) ............................................. 6
Press the CLK button h to switch between the clock and audio display. When an audio function is
performed while the time display is selected, the audio display will appear for 5 seconds, then the display
will return to the time mode.
TO CANCEL THE BEEP TONES .................................1, 7
Turn off the power by depressing the POWER button c.
To cancel all beep tones, press the button i and the POWER button c simultaneously for more than
3 seconds and then "BEEP OFF" is displayed.
To turn on the beep tones again, perform the same procedure. The beep tones are set and "BEEP ON"
is displayed.
DEMO MODE ON/OFF ............................................... 1, 8
Turn off the power by depressing the POWER button c.
To turn ON/OFF the demo mode, press the button j and the POWER button c simultaneously for
more than 3 seconds.
DEMO ON : Demo is displayed.
DEMO OFF : Display is OFF.
(DEFAULT : DEMO ON)
FM1 FM2 MW
FM3
1
2
3
1
2

Sanyo FXD-MP900 Specifications

General

Brand	Sanyo
Model	FXD-MP900
Category	Car Receiver
Language	English