20
CONNECTING A DVD PLAYER TO THE DTV
DVD PLAYER
S-VIDEO JACK
WHITE & RED
AUDIO JACKS
VIDEO2 COMPOSITE (ANALOG) JACKS:
Connection Option 3
“No Signal” will appear randomly
on the screen when no signal is
detected at the S-Video jack.
Check Audio/ Video connections.
Check external equipment
connections.
Check external equipment
setting.
Press the INPUT key.
Switch on external equipment.
Set external equipment output
connections to match input
connections.
.
SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!
HELPFUL HINTS (PROBLEMS/SOLUTIONS)
OPERATING TIP:
Refer to the owner’s manuals and user’s
guides that came with your external equip-
ment for connection options.
DTV VIDEO2
REMOTE CONTROL
INPUT
1
Connect DVD Player to the TV S-Video In Jack.
2
Connect an Audio cable to the VIDEO2 White and
Red AV jacks.
3
Press INPUT to select Video2 to view a DVD.
To Next Page
Loading...
