22
CONNECTING AN AV RECEIVER TO THE DTV
DTV AUDIO OUT JACKS (DIGITAL & ANALOG)
BACK VIEW OF DTV
OPTICAL DIGITAL CABLE
AV RECEIVER
No Sound or Poor Sound
Check external equipment
connections.
Switch on external equipment.
HELPFUL HINTS (PROBLEMS/SOLUTIONS)
SYMPTOM
CHECK THESE CONDITIONS TRY THESE SOLUTIONS
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!
OPERATING TIP:
Refer to the owner’s manual
that came with your external
equipment for connection
options.
AUDIO OUT
[For Stereo
Sound]
1
Connect a Digital Audio cable from the DTV
Digital Audio Output jack to a Optic Digital
Audio In jack on an AV Receiver.
2
Connect an Audio cable from the DTV Audio
Out jacks to Audio In jacks on the AV
Receiver.
Note: Dolby® Digital 5.1 audio is available only at the
Digital Audio Output and only when received as
part of a Digital Antenna signal.
To Next Page
Loading...
