Why does my Sanyo HV-DX3E remote control not work?
If the remote control for your Sanyo DVD VCR Combo is not working, the battery may be weak or exhausted. Alternatively, the receiver of the remote control may be of an incompatible frequency to the sender frequency.
Why is the picture poor/noisy in play on my Sanyo HV-DX3E?
If you're experiencing noise or poor picture quality during playback on your Sanyo DVD VCR Combo, try pressing the “TRACKING” button to improve the picture. If the issue persists, the videotape may be worn, so try using a different one.
What to do if there is no picture on VCR channel on Sanyo DVD VCR Combo?
If your Sanyo DVD VCR Combo isn't displaying a picture on the VCR channel, first ensure that the VCR is turned on. Then, select TV by pressing the [TV/VCR] button on the remote control.
How to select cable broadcasting on Sanyo HV-DX3E DVD VCR Combo?
If you're unable to select cable broadcasting on your Sanyo DVD VCR Combo, select the “CABLE” program number from the “CHANNEL SETTING.”
What to do if sound and screen are irregular on Sanyo DVD VCR Combo?
If your Sanyo DVD VCR Combo is showing irregular sound and screen, or displaying an "Error" message, the VCR heads may be contaminated. Use a head-cleaner to clean the VCR heads.
How to fix “Power On” does not work on Sanyo HV-DX3E?
If your Sanyo DVD VCR Combo is not turning on, make sure the power plug is properly inserted into the mains socket. Also, check if a videotape is inserted. If it still doesn't work, try switching it off and reinserting the plug into the mains socket.
What to do if a videotape is not recognised by Sanyo HV-DX3E?
If your Sanyo DVD VCR Combo is not recognizing a videotape, check if the power plug is properly inserted into the mains socket and that a videotape is inserted correctly, with the transparent window side up. If you've just ejected the tape, fully eject it before trying again.
Why on inserting a videotape, the tape is re-ejected from Sanyo DVD VCR Combo?
If, when inserting a videotape into your Sanyo DVD VCR Combo, the tape is immediately re-ejected, this is a safety mode to protect the videotape and is operated automatically. Please pull out the tape and put it in again.
How to fix if picture is not clear on Sanyo HV-DX3E DVD VCR Combo?
If the picture on your Sanyo DVD VCR Combo isn't clear, and the videotape was recorded by another/incompatible product or old faulty unit, stripes may appear on the screen. Try to adjust the screen using the [TRACKING+/-] button. You can also try using a head-cleaner.
What to do if a channel on video and a play screen does not appear on Sanyo HV-DX3E DVD VCR Combo?
If you are experiencing a channel on video and a play screen that does not appear on your Sanyo DVD VCR Combo, check your antenna’s connection. The TV channel should be tuned to the unit on a vacant program number video channel. Also, check your antenna’s signal strength; if it's weak, contact an aerial specialist. Finally, press “TV/VCR” and ensure “VCR” is displayed on the display panel.
General| Brand | Sanyo |
|---|---|
| Model | HV-DX3E |
| Category | DVD VCR Combo |
| Language | English |
To Next Page
